Plant-Tech CLEAR-CUT
Case Pack
- 2 x 2.5 gallon
- 265 gallon
Ingredients
Monourea Sulfuric Acid Adduct, Propane-1,2,3-Troil, Tallow Amine Ethoxylate 74.45%
Plant-Tech CLEAR-CUT
WATER CONDITIONING AGENT
ACIDIFIER • HUMECTANT • SURFACTANT
Plant-Tech CLEAR-CUT is a special formulation of buffers, activators, and water conditioners designed to enhance the degree and speed of herbicide performance.
Plant-Tech CLEAR-CUT can improve both pesticide spray application and pesticide efficacy.
Plant-Tech CLEAR-CUT can eliminate the antagonistic effects of hard water on herbicide efficacy.
Plant-Tech CLEAR-CUT is designed primarily to be applied with herbicides which utilize glyphosate as the active ingredient.
Plant-Tech CLEAR-CUT will adjust solutions to a low pH and tie up metal ions which can deactivate glyphosate and other sensitive pesticides. However, it is suitable and effective for most pesticides and nutritional products which can be used with wetter/spreader type adjuvants.
Do not use Plant-Tech CLEAR-CUT with tank mix partners that cannot tolerate low pH solutions.
Resources
Use Rate
Plant-Tech CLEAR-CUT may be used with pesticides that may benefit from its water conditioning and acidifying properties.
If Water Hardness is Less Than 200 ppm: Use 0.25% v/v (1 quart) per 100 gallons of spray mix.
If Water Hardness is Between 200-500 ppm: Use 0.50% v/v (2 quarts) per 100 gallons of spray mix.
If Water Hardness is Greater Than 500 ppm: Use 1.0% v/v (1 gallon) per 100 gallons of spray mix.
Mixing
- Unless otherwise instructed by pesticide label, always add Plant-Tech CLEAR-CUT first to the spray water.